Acceleration Converter

Convert between g, m/s², ft/s², Gal and speed-per-second units.

Converter

9.80665

Example Result

Your converted value will appear here

The calculated result will appear here after you press Calculate.

How to Use

  1. 1

    Pick the acceleration unit you're converting from in the "From" dropdown.

  2. 2

    Type the value you want to convert.

  3. 3

    Pick the acceleration unit you want to convert to in the "To" dropdown.

  4. 4

    Read the live result instantly — no button needed.

  5. 5

    Use Swap to flip the units, or Copy Result to grab the conversion.

Examples

By O.E. — Partner, chairman of the board and CEO of a metal products manufacturer for 21 years; the company exports to 45 countries.

Drafted with AI assistance; calculations checked against primary sources and tested with the site's own code. About FlowUtil

Last reviewed

Meters per Second Squared, Standard Gravity, G-Force and Feet per Second Squared

Acceleration is how fast speed changes. The SI unit is the metre per second squared, and one standard g equals exactly 9.80665 m/s², or about 32.17 ft/s². Enter a value and pick the units. The sections below cover car times, earthquakes and vibration, which each use their own units.

Quick Standard gravity (g₀) → Meters/second² (m/s²) Conversion Table

1 g₀ = 9.80665 m/s² exactly by definition. 1 Gal = 0.01 m/s².

Standard gravity (g₀)Meters/second² (m/s²)
0.0010.0098
0.010.0981
0.10.9807
0.54.9033
19.8067
219.6133
329.42
549.0332
9.896.1052

Worked Conversion Examples

  1. 11 g₀ → m/s²

    1 g₀ = 9.80665 m/s²

    1 g₀ = 9.80665 m/s²

  2. 21 g₀ → ft/s²

    1 g₀ = 32.174049 ft/s²

    1 g₀ = 32.174049 ft/s²

  3. 39.81 m/s² → g₀

    9.81 m/s² = 1.000342 g₀

    9.81 m/s² = 1.000342 g₀

  4. 432 ft/s² → m/s²

    32 ft/s² = 9.7536 m/s²

    32 ft/s² = 9.7536 m/s²

  5. 5100 Gal → m/s²

    100 cm/s² = 1 m/s²

    100 cm/s² = 1 m/s²

  6. 612 mph/s → g₀

    12 mph/s = 0.547025 g₀

    12 mph/s = 0.547025 g₀

About the Acceleration Units

Meter per second squaredm/s²

The SI derived unit of acceleration. Used in vehicle dynamics, vibration and physics.

Standard gravityg₀

9.80665 m/s² exactly by definition. The common unit for vehicle and human accelerations.

GalGal

1 cm/s² = 0.01 m/s² exactly. The CGS unit, used in seismology and gravity surveys.

Foot per second squaredft/s²

0.3048 m/s² exactly. The US unit for vehicle and mechanism accelerations.

When This Conversion Is Used

Acceleration conversion appears in vehicle dynamics, vibration and aerospace work.

  • Vehicle performance0–100 km/h times are converted to m/s² or g₀ for acceleration comparison.
  • Vibration & shockVibration accelerations in m/s² or g₀ are converted for fatigue and comfort analysis.
  • Aerospace & launchRocket and aircraft accelerations in g₀ are converted to m/s² for load calculations.
  • Elevators & ridesRide accelerations in g₀ are converted to m/s² for comfort-limit checks.

The conversions to keep in your head

gm/s²ft/s²Gal
0.01 g0.0980.329.8
0.1 g0.983.2298
0.5 g4.9016.09490
1 g9.8132.17981
2 g19.6164.351,961
5 g49.03160.874,903

As a quick estimate, divide m/s² by 10 to get g. That is about 2% off.

From a 0–60 time to g

Average acceleration is the change in speed divided by the time. Sixty mph is 26.82 m/s.

0–60 mph timem/s²gmph/s
3 s8.940.9120
5 s5.360.5512
8 s3.350.347.5
10 s2.680.276

The same sum works in metric. A 0–100 km/h run in 3 s averages 27.78 ÷ 3 = 9.26 m/s², or 0.94 g. These are averages, and the peak in a real run is higher.

Braking runs the other way. With an assumed steady 0.8 g from 60 mph, stopping distance is v² ÷ 2a = 719.4 ÷ 15.69 = 45.9 m, or about 150 ft, not counting reaction time.

Turning g into a force

Force is mass times acceleration, and that is usually why you are converting. A 1,500 kg car braking at 0.8 g needs 1,500 × 7.85 = 11.8 kN at the tyres. The force converter puts that in lbf.

Turns count too, because changing direction is acceleration. At 30 m/s on a 150 m curve, a = v² ÷ r = 6.0 m/s², or 0.61 g. The centripetal force calculator does this for you.

Why g₀ is exact and your local g is not

Standard gravity, g₀, is an agreed number: 9.80665 m/s². Real gravity depends on where you stand, from about 9.78 m/s² at the equator to about 9.83 m/s² at the poles. That is roughly ±0.3%. An accelerometer reading "1 g" refers to the agreed value, which is why ratings and specifications can be compared worldwide.

Watch the letters as well. A lower-case g here is not a gram, and Gal is not a gallon.

Earthquakes use %g, and gravity surveys use milligals

Two fields use very different scales.

  • Earthquakes: the USGS reports peak ground acceleration in percent of g. Ground shaking of 20 %g is 0.2 g, which is 1.96 m/s², or 196 Gal.
  • Gravity surveys: geophysicists measure tiny changes in gravity, so they use the milligal. One mGal is 0.00001 m/s², or about one millionth of g.

Vibration: state peak or RMS

For a steady vibration, acceleration comes from frequency and displacement:

a (peak) = (2π × f)² × x

At 30 Hz with 0.5 mm peak displacement, a = 17.8 m/s², which is 1.81 g peak. The RMS value of a sine wave is 0.707 of the peak, so the same vibration is 1.28 g RMS. Both are right, and mixing them is a 41% error. Use the frequency converter if your speed is in RPM.

Precision & Rounding

The g₀-to-m/s² relationship is exact: 1 g₀ = 9.80665 m/s² by definition. The Gal equals 0.01 m/s² exactly. FlowUtil computes with full precision and rounds only the display.

Real accelerations vary with duration, direction and human tolerance, so two or three significant figures normally reflect the measurement. Human g-tolerance is direction-dependent, so state the axis.

Sources

  1. National Institute of Standards and Technology, Special Publication 811, Guide for the Use of the International System of Units, Appendix B.
  2. U.S. Geological Survey, ShakeMap product documentation.

Frequently Asked Questions

How many m/s² is 1 g?

Exactly 9.80665 m/s².

How many ft/s² is 1 g?

About 32.174 ft/s².

How do I convert m/s² to g?

Divide by 9.80665.

What is a Gal?

One centimetre per second squared, or 0.01 m/s².

How many g is 0 to 60 in 5 seconds?

About 0.55 g on average.

Does gravity change with location?

Yes, by about ±0.3% across Earth's surface.

What is a good rule for converting g to m/s²?

Multiply by 10 for a rough answer, or 9.81 for a close one.