Convert frequency and rotation speed, from RPM to gigahertz.
Example Result
Your converted value will appear here
The calculated result will appear here after you press Calculate.
Pick the frequency unit you're converting from in the "From" dropdown.
Type the value you want to convert.
Pick the frequency unit you want to convert to in the "To" dropdown.
Read the live result instantly — no button needed.
Use Swap to flip the units, or Copy Result to grab the conversion.
By O.E. — Partner, chairman of the board and CEO of a metal products manufacturer for 21 years; the company exports to 45 countries.
Drafted with AI assistance; calculations checked against primary sources and tested with the site's own code. About FlowUtil
Last reviewed
Frequency counts cycles per second, in hertz. Electronics work with kHz, MHz and GHz, each 1,000 times the last. Machines work in RPM, which is cycles per minute, so 60 RPM is 1 Hz. Enter a value and pick the units. The sections below cover the motor speed trap, period and wavelength.
1 MHz = 1,000,000 Hz exactly. 1 RPM = 1/60 Hz ≈ 0.016667 Hz.
| Megahertz (MHz) | Hertz (Hz) |
|---|---|
| 0.001 | 1,000 |
| 0.01 | 10,000 |
| 0.1 | 100,000 |
| 1 | 1,000,000 |
| 2.4 | 2,400,000 |
| 5 | 5,000,000 |
| 10 | 10,000,000 |
| 100 | 100,000,000 |
| 1,000 | 1,000,000,000 |
| 2,400 | 2,400,000,000 |
12.4 GHz → MHz
2.4 GHz = 2,400 MHz
2.4 GHz = 2,400 MHz
23000 RPM → Hz
3,000 rev/min = 50 Hz
3,000 rev/min = 50 Hz
360 Hz → RPM
60 Hz = 3,600 rev/min
60 Hz = 3,600 rev/min
41800 RPM → rad/s
1,800 rev/min = 188.495559 rad/s
1,800 rev/min = 188.495559 rad/s
55 MHz → kHz
5 MHz = 5,000 kHz
5 MHz = 5,000 kHz
61 GHz → Hz
1 GHz = 1,000,000,000 Hz
1 GHz = 1,000,000,000 Hz
HertzHz
The SI derived unit of frequency: one cycle per second. Named after Heinrich Hertz. The base unit for all periodic phenomena.
MegahertzMHz
10⁶ Hz exactly. Used for radio FM broadcasts, CPU clock rates and older processor speeds.
GigahertzGHz
10⁹ Hz exactly. Modern CPU and network frequencies (Wi-Fi, 5G, radar) are quoted in GHz.
Revolutions per minuteRPM
1/60 Hz for a shaft. The rotation unit for motors, engines and fans. An AC motor's speed also depends on its poles.
Frequency conversion appears in electronics, rotating machinery, audio and RF work.
| From | To | Multiply by |
|---|---|---|
| Hz | kHz | 0.001 |
| MHz | Hz | 1,000,000 |
| GHz | MHz | 1,000 |
| Hz | RPM | 60 |
| RPM | Hz | 1 ÷ 60 |
| Hz | rad/s | 2π (6.2832) |
| RPM | rad/s | 0.10472 |
So 2.4 GHz is 2,400 MHz, 3,000 RPM is 50 Hz, and 1,800 RPM is 188.5 rad/s. Use rad/s in rotation formulas, such as power = torque × angular speed.
The Hz-to-RPM factor describes a shaft turning once per cycle. An AC motor does not always do that. Its magnetic field turns at the synchronous speed, which depends on the number of poles:
n = 120 × f ÷ p
| Poles | RPM at 60 Hz | RPM at 50 Hz |
|---|---|---|
| 2 | 3,600 | 3,000 |
| 4 | 1,800 | 1,500 |
| 6 | 1,200 | 1,000 |
| 8 | 900 | 750 |
An induction motor runs a little slower than this, because of slip. A 4-pole motor may be labelled 1,750 RPM, for example, which is 2.8% below 1,800.
This matters on a variable-frequency drive. A nameplate of 1,750 RPM converts to 29.2 Hz, yet the motor runs at that speed with the drive set near 60 Hz. For a 4-pole motor, 30 Hz gives about 900 RPM. Use the table above, not RPM ÷ 60, to set a drive. RPM ÷ 60 gives the shaft's rotation rate, which is what you do want for vibration work.
Machine faults show up at multiples of shaft speed. A shaft at 1,750 RPM turns at 29.2 Hz, so an imbalance shows at about 29 Hz. A 6-blade fan at 1,800 RPM has a blade-pass frequency of 30 × 6 = 180 Hz. If a running speed falls near a natural frequency, the shaft critical speed calculator is the next step. To change speed with belts, use the pulley speed calculator. Displacement and frequency give acceleration, which the acceleration converter can express in g.
Period is the time for one cycle: T = 1 ÷ f.
| Frequency | Period |
|---|---|
| 50 Hz | 20 ms |
| 60 Hz | 16.67 ms |
| 1 kHz | 1 ms |
| 1 MHz | 1 µs |
| 1 GHz | 1 ns |
For radio waves in air, wavelength is λ = c ÷ f, with c = 299,792,458 m/s.
| Frequency | Wavelength |
|---|---|
| 100 MHz (FM radio) | 3.00 m |
| 2.4 GHz (Wi-Fi) | 12.5 cm |
| 5 GHz (Wi-Fi) | 6.0 cm |
Sound uses the same idea with its own, much slower speed.
| Thing | Frequency |
|---|---|
| US mains power | 60 Hz |
| European mains power | 50 Hz |
| Concert pitch, A4 | 440 Hz |
| Human hearing | about 20 Hz to 20 kHz |
| FM broadcast band | 88–108 MHz |
| Wi-Fi bands | 2.4, 5 and 6 GHz |
Circuit cutoff frequencies come from resistor and capacitor values, as shown on the capacitance converter.
All SI prefix relationships are exact powers of 1,000. The RPM-to-Hz factor 1/60 is exact. FlowUtil computes with full precision and rounds only the displayed value.
Clock and RF frequencies are often specified to many digits because timing accuracy matters, so keep the precision of the source. For mechanical RPM, whole numbers are normally the practical unit.