Centripetal Force Calculator

The inward force needed to keep a mass moving on a circle, from its speed or rotational speed.

Calculator

kg
m
m/s

Example Result

Your result will appear here

The calculated result will appear here after you press Calculate.

About the Centripetal Force Calculator

Anything moving on a curved path is accelerating towards the centre of the curve, even at constant speed, and something has to supply the force for that acceleration: the friction between tyres and road, the tension in a string, the hub of a rotor, gravity for a planet or satellite. Centripetal force is F = m v² ÷ r, or F = m ω² r when you know the rotational speed. Enter the mass, the radius and either the linear speed or the rpm, in SI or US units; the calculator returns the force, the acceleration, the acceleration in g (the relative centrifugal force of a centrifuge) and the angular velocity. The examples below take a car round a curve, a sample round a centrifuge and a weight round a machine shaft, and explain why "centrifugal force" is a matter of viewpoint.

How to Use the Centripetal Force Calculator

  1. 1

    Select whether you know the linear speed or the rpm, and SI or US units.

  2. 2

    Enter the mass and the radius of the circular path.

  3. 3

    Enter the speed and press Calculate.

Centripetal Force Calculator Examples

Frequently Asked Questions

What is the formula for centripetal force?

F = m v² ÷ r, or F = m ω² r with ω in rad/s.

How do I use rpm?

ω = 2π × rpm ÷ 60; the rpm mode does this for you.

What supplies centripetal force?

Whatever pulls inward: tyre friction for a car, tension for a ball on a string, the hub for a rotor, gravity for a planet or satellite.

Is centrifugal force real?

It is an apparent force felt in the rotating frame. Seen from outside, the only force on the object is the inward centripetal force; the equal outward push of Newton's third law acts on whatever supplies that force (the road, the string, the bearing), not on the object.

What is RCF on a centrifuge?

The centripetal acceleration as a multiple of g: ω² r ÷ 9.80665.

How fast can a car take a flat curve?

v = √(μ g r): with μ = 0.7 and r = 150 m, about 32 m/s (115 km/h).

By O.E. — Partner, chairman of the board and CEO of a metal products manufacturer for 21 years; the company exports to 45 countries.

Drafted with AI assistance; calculations checked against primary sources and tested with the site's own code. About FlowUtil

Last reviewed

Force, acceleration and g

F = m v² ÷ r = m ω² r; a = v² ÷ r = ω² r; ω = v ÷ r = 2π n ÷ 60; g-force = a ÷ 9.80665. Force grows with the square of speed: double the speed and the force is four times as large. At a fixed rpm, force grows in proportion to the radius; at a fixed linear speed, a tighter radius means more force.

A car, a centrifuge and a machine part

  1. 1A 1,500 kg car on a 150 m radius curve at 25 m/s (90 km/h).

    a = 25² ÷ 150 = 4.17 m/s² (0.42 g)

    6,250 N · friction needed μ = 0.43

    On a flat road all of it must come from tyre friction — comfortable on dry asphalt, marginal on ice. Turned round, the highest speed for a given friction is v = √(μ g r).

  2. 2US: a 3,500 lb car at 60 mph (88 ft/s) on a 300 ft radius curve.

    a = 88² ÷ 300 = 25.8 ft/s² (0.80 g)

    2,808 lbf of side force

    Close to the grip limit of road tyres. Banking lets part of the force come from the road's normal reaction instead of friction.

  3. 3A centrifuge at 10,000 rpm and 10 cm radius.

    ω = 1,047.2 rad/s; a = ω² r = 109,662 m/s²

    RCF = 11,182 × g

    The familiar shortcut RCF = 1.118 × 10⁻⁵ × r[cm] × rpm² is the same formula with the constants combined; protocols specify g rather than rpm because RCF depends on the radius.

  4. 4A 2 kg mass at 0.5 m radius turning at 1,450 rpm.

    2 × 151.84² × 0.5

    23,056 N

    More than a tonne of force from a 2 kg part. A residual unbalance of 10 g·mm on a rotor at 3,000 rpm produces m r ω² = 0.99 N, felt by the bearings once per revolution; double the speed and it becomes 3.9 N.

Centripetal and centrifugal

Seen from the ground, there is only one horizontal force on the car: the inward centripetal force from the road. The passengers, riding in the rotating frame of the car, feel pushed outwards; that apparent outward "centrifugal force" is how inertia looks from a rotating viewpoint. Separately, by Newton's third law, the car pushes outward on the road with an equal force — but that force acts on the road, not on the car. Engineers often call the outward load on a bearing or rim "centrifugal force"; it has the same size, m v² ÷ r.

Sources

Explore Knowledge

Deepen your understanding with in-depth engineering guides, formulas, and worked examples.

Browse Engineering Guides