Gear Ratio Calculator

Ratio, output speed, torque and direction for a gear pair or a multi-stage gear train.

Calculator

teeth
teeth
RPM
N·m or lb·ft
%

Empty = ideal (no losses).

Example Result

Your result will appear here

The calculated result will appear here after you press Calculate.

About the Gear Ratio Calculator

The gear ratio tells you how many turns the input makes for one turn of the output. Divide the number of teeth on the driven gear by the number on the driving gear: a 20-tooth pinion driving a 60-tooth gear gives 3:1, so the output turns three times slower and — ignoring losses — three times harder. This calculator works out the ratio for a single pair or for a compound train of up to three stages, then the output speed, the output torque with or without an efficiency allowance, and which way the output shaft turns. Use it to size a reducer for a motor, check a conveyor speed or compare bicycle gears.

How to Use the Gear Ratio Calculator

  1. 1

    Choose a single gear pair or a gear train of two or three stages.

  2. 2

    Enter the teeth on the driver and driven gear of each stage.

  3. 3

    Optionally enter the input speed, input torque and an efficiency per stage.

  4. 4

    Press Calculate for the overall ratio, output speed and torque, and the output direction.

Gear Ratio Calculator Examples

Frequently Asked Questions

How do you calculate gear ratio?

Teeth on the driven gear divided by teeth on the driving gear; for several stages, multiply the stage ratios.

What does a 3:1 gear ratio mean?

The input turns three times for each output turn; the output torque is about three times the input torque, less losses.

How do I find output rpm?

Divide the input rpm by the gear ratio: 1,450 rpm through 3:1 gives 483 rpm.

Does gear ratio change power?

No — only the split between speed and torque. Each mesh loses a little power, so the output torque is slightly below input torque × ratio.

Which way does the output turn?

Opposite to the input for each external mesh; an even number of meshes returns it to the input direction. An idler gear changes the direction but not the ratio.

How do bicycle gears work?

The chainring drives and the rear sprocket is driven: 42 teeth to 15 is a ratio of 0.357, so the wheel turns 2.8 times for each pedal turn — 224 rpm at 80 rpm cadence.

How large can one stage be?

Spur and helical pairs are usually kept to modest single-stage ratios; larger reductions use multiple stages, planetary sets or worm gears.

By O.E. — Partner, chairman of the board and CEO of a metal products manufacturer for 21 years; the company exports to 45 countries.

Drafted with AI assistance; calculations checked against primary sources and tested with the site's own code. About FlowUtil

Last reviewed

Ratio, speed, torque and direction

For one pair, GR = teeth on the driven gear ÷ teeth on the driver; for a train, multiply the stage ratios. Output speed = input speed ÷ GR. Power is conserved apart from losses, so output torque = input torque × GR × efficiency per stage raised to the number of stages. GR above 1 is a reduction (slower, stronger), below 1 an overdrive. Each external gear mesh reverses the direction of rotation; a chain or belt does not, and an idler gear reverses it without changing the ratio.

SymbolMeaning
GRN_driven ÷ N_driver (× each further stage)
ηEfficiency per stage; empty = ideal

A reducer, a two-stage train and a bicycle

  1. 120-tooth pinion on a 1,450 rpm motor driving a 60-tooth gear; 50 N·m; 98% efficient mesh.

    60 ÷ 20 = 3; 1,450 ÷ 3; 50 × 3 × 0.98

    3 : 1 · 483.3 rpm · 147 N·m · output opposite to the motor

  2. 2Two stages, 20 → 60 and 20 → 80, 97% per stage, same motor.

    3 × 4 = 12; 1,450 ÷ 12; 50 × 12 × 0.97²

    12 : 1 · 120.8 rpm · 564.5 N·m (ideal 600) · same direction as the motor

    Splitting a large reduction into stages avoids a gear twelve times the size of the pinion.

  3. 3Bicycle: 42-tooth chainring (driver), 15-tooth sprocket (driven), pedalling at 80 rpm.

    15 ÷ 42 = 0.357; 80 ÷ 0.357

    224 rpm at the rear wheel, same direction (chain)

    A 28-tooth sprocket brings the wheel down to 120 rpm for climbing.

Formula basis

  1. Gear kinematics (tooth counts fix the speed ratio exactly) and conservation of power, P = T × ω, less mesh losses. Efficiency is your input; the examples assume 97–98% per stage, as the merged gear-train page did.

Explore Knowledge

Deepen your understanding with in-depth engineering guides, formulas, and worked examples.

Browse Engineering Guides