Metric Conversion Table

Metric to Imperial conversion factors for length, area, volume, mass, temperature, speed and pressure.

Conversion mistakes are expensive, and most of them come from half-remembered factors. This table gathers the exact and commonly rounded conversion factors between metric and Imperial or US customary units across length, area, volume, mass, temperature, speed, pressure and energy, plus the full set of SI prefixes and a practical kitchen section.

Length

FromToMultiply byReverse factor
millimetre (mm)inch (in)0.039370125.4 (exact)
centimetre (cm)inch (in)0.3937012.54 (exact)
metre (m)foot (ft)3.280840.3048 (exact)
metre (m)yard (yd)1.093610.9144 (exact)
kilometre (km)mile (mi)0.6213711.609344 (exact)
kilometre (km)nautical mile (nmi)0.5399571.852 (exact)
micrometre (µm)mil (thou)0.039370125.4

7 rows

Area

FromToMultiply byReverse factor
square centimetre (cm²)square inch (in²)0.1550006.4516 (exact)
square metre (m²)square foot (ft²)10.76390.09290304 (exact)
square metre (m²)square yard (yd²)1.195990.83612736
hectare (ha)acre (ac)2.471050.404686
square kilometre (km²)square mile (mi²)0.3861022.589988

5 rows

Volume

FromToMultiply byReverse factor
millilitre (mL)US fluid ounce (fl oz)0.033814029.5735
litre (L)US gallon (gal)0.2641723.785412
litre (L)Imperial gallon0.2199694.546090
litre (L)US quart (qt)1.0566880.946353
litre (L)US pint (pt)2.1133760.473176
cubic metre (m³)cubic foot (ft³)35.31470.0283168
cubic metre (m³)cubic yard (yd³)1.307950.764555
cubic centimetre (cm³)cubic inch (in³)0.061023716.387064 (exact)

8 rows

Mass and weight

FromToMultiply byReverse factor
gram (g)ounce (oz)0.035274028.349523
kilogram (kg)pound (lb)2.2046230.45359237 (exact)
kilogram (kg)stone (st)0.1574736.350293
tonne (t)short ton (US)1.1023110.907185
tonne (t)long ton (UK)0.9842071.016047
gram (g)grain (gr)15.432360.06479891 (exact)

6 rows

Temperature

ConversionFormulaExample
Celsius to Fahrenheit°F = (°C × 9/5) + 3220 °C = 68 °F
Fahrenheit to Celsius°C = (°F − 32) × 5/9100 °F ≈ 37.8 °C
Celsius to KelvinK = °C + 273.1525 °C = 298.15 K
Kelvin to Celsius°C = K − 273.15300 K ≈ 26.85 °C
Fahrenheit to KelvinK = (°F − 32) × 5/9 + 273.1532 °F = 273.15 K
Celsius to Rankine°R = (°C + 273.15) × 9/50 °C = 491.67 °R

6 rows

Speed, pressure, energy and power

FromToMultiply by
kilometre per hour (km/h)mile per hour (mph)0.621371
metre per second (m/s)kilometre per hour (km/h)3.6 (exact)
metre per second (m/s)foot per second (ft/s)3.28084
knot (kn)kilometre per hour (km/h)1.852 (exact)
kilopascal (kPa)pound per square inch (psi)0.145038
barpsi14.50377
barkilopascal (kPa)100 (exact)
atmosphere (atm)kilopascal (kPa)101.325 (exact)
joule (J)calorie (cal)0.239006
kilojoule (kJ)British thermal unit (BTU)0.947817
kilowatt-hour (kWh)megajoule (MJ)3.6 (exact)
kilowatt (kW)horsepower (hp, mechanical)1.341022
newton metre (N·m)pound-foot (lbf·ft)0.737562

13 rows

SI prefixes

PrefixSymbolFactorPower of ten
quettaQ1 000 000 000 000 000 000 000 000 000 00010³⁰
ronnaR1 000 000 000 000 000 000 000 000 00010²⁷
yottaY1 000 000 000 000 000 000 000 00010²⁴
zettaZ1 000 000 000 000 000 000 00010²¹
exaE1 000 000 000 000 000 00010¹⁸
petaP1 000 000 000 000 00010¹⁵
teraT1 000 000 000 00010¹²
gigaG1 000 000 00010⁹
megaM1 000 00010⁶
kilok1 00010³
hectoh10010²
decada1010¹
decid0.110⁻¹
centic0.0110⁻²
millim0.00110⁻³
microµ0.00000110⁻⁶
nanon0.00000000110⁻⁹
picop0.00000000000110⁻¹²
femtof10⁻¹⁵10⁻¹⁵
attoa10⁻¹⁸10⁻¹⁸
zeptoz10⁻²¹10⁻²¹
yoctoy10⁻²⁴10⁻²⁴
rontor10⁻²⁷10⁻²⁷
quectoq10⁻³⁰10⁻³⁰

24 rows

Kitchen and everyday quick conversions

MeasureMetricUS customary
1 teaspoon4.93 mL1/3 tablespoon
1 tablespoon14.79 mL3 teaspoons
1 cup236.6 mL8 fl oz
1 US pint473.2 mL2 cups
1 US quart946.4 mL4 cups
1 US gallon3.785 L4 quarts
1 pound of flour≈454 g≈3.6 cups
Oven: 180 °C180 °C350 °F (gas mark 4)
Oven: 200 °C200 °C400 °F (gas mark 6)
Oven: 220 °C220 °C425 °F (gas mark 7)

10 rows

About the Metric Conversion Table

Sources

Classification: Exact and rounded conversion factors

Sources

Factors defined by international agreement are exact: 1 in = 25.4 mm, 1 lb = 0.45359237 kg, 1 mi = 1.609344 km, 1 atm = 101.325 kPa, 1 gal (US) = 3.785411784 L. Other factors are rounded to the precision shown. SI prefixes are exact powers of ten. Temperature conversions are exact formulas, not linear factors.

How it was compiled

The table converts between metric and Imperial/US customary units by multiplication (and the reverse factor). Length, area, volume, mass, speed, pressure and energy use exact or rounded factors; temperature uses the exact formulas °F = (°C×9/5)+32 and K = °C+273.15. SI prefixes are exact decimal multiples/submultiples.

How current it is

Classification: Stable (defined factors)

The exact factors are fixed by international agreement and do not change. Rounded factors are stable at the precision shown. The 2022 SI prefix additions (ronna, quetta, ronto, quecto) are included.

Limitations

  • Some factors are rounded; use the exact factor for high-precision work (the table marks which are exact).
  • US and Imperial gallons/pints differ by ~20%; the table lists both — do not mix them.
  • Temperature is not converted by a multiplication factor; use the formula, especially across Fahrenheit and Kelvin.

Using it

  • Use the exact (marked) factors for precision; use the rounded factors for quick estimates.
  • State which gallon/pint system (US or Imperial) is meant to avoid 20% errors.
  • For temperature, apply the formula rather than a linear factor.

Units and notation

Factors are dimensionless multipliers; temperature conversions are formulas in °C, °F, K and °R.

Frequently Asked Questions

Which conversion factors are exact?

Factors defined by international agreement are exact: 1 inch = 25.4 mm, 1 pound = 0.45359237 kg, 1 mile = 1.609344 km and 1 atm = 101.325 kPa. Others in this table are rounded.

What is the difference between a US and an Imperial gallon?

A US gallon is 3.785 L and an Imperial gallon is 4.546 L — about 20% larger. The same applies to pints and fluid ounces, so recipe and fuel figures must state which system they use.

How do I convert between Celsius and Fahrenheit quickly?

For an approximation, double the Celsius value and add 30. For accuracy use °F = (°C × 9/5) + 32.

Why is weight in kilograms and force in newtons?

Kilogram measures mass; newton measures force. On Earth 1 kg exerts about 9.807 N of force, which is why kgf and N differ by that factor.

How many SI prefixes are there?

Twenty-four, from quetta (10³⁰) down to quecto (10⁻³⁰). Ronna, quetta, ronto and quecto were added in 2022.

Which countries still use Imperial units?

The United States uses US customary units broadly; Liberia and Myanmar use mixed systems, and the UK retains Imperial for road distances, draught beer and body weight.

Explore Knowledge

Go deeper with FlowUtil guides that explain the concepts behind this reference table.

Browse Knowledge Library