Brittleness
Quick Definition
Brittleness is a material's tendency to fracture with little or no plastic deformation, absorbing little energy before it breaks. It shows up as low elongation and reduction of area in a tensile test and low absorbed energy in a Charpy impact test.
By O.E. — Partner, chairman of the board and CEO of a metal products manufacturer for 21 years; the company exports to 45 countries.
Drafted with AI assistance; calculations checked against primary sources and tested with the site's own code. About FlowUtil
Last reviewed
Brittleness explained
A ductile material stretches, necks and bends before it breaks; a brittle one breaks suddenly, often from a small flaw, with fracture surfaces that fit back together. Brittleness is not the opposite of strength — hardened tool steel and glass are both strong and brittle. It is the opposite of ductility (how much a material can deform plastically) and closely related to low toughness (how much energy it absorbs before fracture).
Elongation after fracture (tensile test): A = (Lu − L₀) / L₀ × 100 %, where L₀ is the original gauge length and Lu the gauge length after the broken pieces are fitted together. Low A means brittle behaviour. Reduction of area: Z = (S₀ − Su) / S₀ × 100 % at the fracture.
Charpy V-notch impact energy (J): a pendulum breaks a notched bar and the absorbed energy is recorded. Steels can change from ductile to brittle as the temperature drops (the ductile-to-brittle transition), which is why impact energy is specified at a test temperature.
What makes metals brittle: low temperature (for body-centred cubic steels), high strain rate, notches and triaxial stress, hydrogen embrittlement, untempered martensite after hardening, and coarse graphite flakes in grey cast iron.
Design implications: brittle parts give no warning before failure, so designs use larger safety factors and avoid sharp notches; impact energy should be checked at the lowest service temperature; brittle materials are often far stronger in compression than in tension (concrete, cast iron, ceramics).
Synonyms & Related Terms
Real-World Example
Cast iron cookware is prized for heat retention but will crack if dropped, because cast iron is brittle. Similarly, a hardened but untempered steel tool can shatter on impact rather than bending — which is why tempering is applied to restore some toughness.
Worked Examples
A brittle result
A test bar with a 50 mm gauge length measures 50.4 mm after fracture. A = 0.4 / 50 = 0.8 %. With under one per cent elongation and a flat, granular fracture face, the material behaved in a brittle way — typical of grey cast iron.
A ductile result
A structural steel bar with the same 50 mm gauge length measures 61.5 mm after fracture: A = 11.5 / 50 = 23 %, with a visible neck — clearly ductile.
Why It Matters
Brittle failure is sudden and catastrophic, so recognising and controlling brittleness is critical in structural and pressure applications. Understanding what makes materials brittle — cold, notches, embrittlement — prevents unexpected fractures.
Industry Applications
Sources
- Encyclopaedia Britannica — Materials testing: Measures of ductility
- ASTM E8/E8M and ISO 6892-1 — Tension testing of metallic materials
- ASTM E23 and ISO 148-1 — Notched bar impact testing (Charpy)
Related Standards
Frequently Asked Questions
Is brittle the same as hard?
No. Hardness resists indentation; brittleness is about how little a material deforms before breaking. Many hard materials are brittle, but not all.
Is glass brittle or ductile?
Brittle at room temperature — it fractures with no plastic deformation.
What is the opposite of brittleness?
Ductility, and for energy absorption, toughness.
Which test shows brittleness best?
A tensile test (elongation, reduction of area) for static loads; a Charpy impact test for sudden loads and low temperatures.
See Also
- Ductility
- Toughness
- Impact Strength